Description

Classification:

ALMCB V5.0 ALMCB V4.3 Debug Chinese server

ALMCB V6.0 HAMCB V4.0 HAMCB V5.0 ALMCB V6.0 with screw print

ALMCBDifferent versions. The scene isV6.0can only be usedV6.0. The scene isV5.0and below can be usedV5.0orV4.3of (whichV4.3thanV5.0for better debugging), cannot be usedV6.0(It will report a fault and require the motherboard to be rewired, which is extremely risky).

HAMCBDifferent versions. The scene isV5.0can only be usedV5.0. If the site is V4.0, it is recommended to use V4.0 (V4.0 has been discontinued and only has a small amount of stock). If V4.0 is used, it will be more difficult to debug because the new version 5.0 has new functions.。

LMCBDiscontinued, available for useALMCB V5.0 or V4.3substitute. An operator is required for debugging. Higher versions are compatible with lower versions.

ALMCB HAMCB XMCBIt needs to be debugged before it can be used. The debugging steps are complicated, the requirements for debugging personnel are high, and debugging is easy to fail. We provide paid debugging services. You need to send the old motherboard back to our company. The technicians will set most of the parameters according to the boss's instructions. After receiving it, you only need to make simple settings on site (the last step must be done on site). Set up and need to use the operator, the technical package teaches). cost500Yuan per piece, please contact customer service for specific operation methods.

ALMCB is divided into different versions. The scene is V6.0 can only use V6.0. The site is V5.0 and below, you can use V5.0 or V4.3 (V4.3 is better for debugging than V5.0), but V6.0 cannot be used (faults will be reported, you need to change the main board, very high risk).

HAMCB is divided into different versions. If the site is V5.0, only V5.0 can be used. If the site is V4.0, it is recommended to use V4.0 (V4.0 has been discontinued and only a small amount of stock is available). If V4.0 uses V5.0, because the new version 5.0 has New features, debugging will be more difficult.

LMCB has been discontinued and can be replaced by ALMCB V5.0 or V4.3. An operator is required for debugging. Higher versions are compatible with lower versions.

ALMCB HAMCB XMCB needs to be debugged before it can be used. The debugging steps are complicated, the requirements for debugging personnel are high, and debugging failure is easy. We provide paid debugging service, you need to send the old motherboard back to our company, and the technician will set most of the parameters as they are according to the boss. After you receive it, you only need to make a simple setting on site (the last step must be on site to settings, and requires the use of the operator, the technology package teaches). The fee is 500 yuan per block, please contact customer service for specific operation methods.